For Your Safety; General Safety Instructions; Definitions Of Alert Icons; Description - Dräger Prestor 5000 Instrucciones De Uso

For your safety

1 For your safety
1.1

General safety instructions

Read the instructions for use carefully before using

the product.
Strictly follow the instructions for use. The user must

understand and strictly observe the complete instructions.
Use the product only for the purposes specified in the
Intended use section of this document.
Do not dispose of the instructions for use. Ensure that they

are retained and appropriately used by the user.
Only fully trained and competent persons are permitted to

use this product.
Comply with all local and national rules and regulations

associated with this product.
Only trained and competent personnel are permitted to use

inspect, repair and
recommends a Dräger service contract for all maintenance
activities and that all repairs are carried out by Dräger.
Use only authentic Dräger spare parts and accessories.

Otherwise the proper functioning of the product may be
impaired.
Do not use a faulty or incomplete product. Do not modify

the product.
Notify Dräger in the event of any component faults or failure.

1.2

Definitions of alert icons

The following alert icons are used in this document to identify
and highlight the associated alert texts and to emphasise
where users need to be particularly alert. The alert icons are
defined as follows:
CAUTION
!
Indicates a potentially hazardous situation which, if not
avoided, could result in physical injury, or damage to
the product or environment. It may also be used as an
alert against unsafe practices.
NOTICE
i i
Additional information on how to use the product.
10
service the product.
2

Description

2.1

Product overview

6
5
Dräger
4
1 Nebuliser
2 Moulded head section with gel face
3 LED
4 Medium pressure connection
5 Pneumatic cylinder
6 Retainer
2.2

Functional description

The Dräger Prestor 5000 can be used to test the leak tightness
and correct functioning of various full face masks.
The full face mask is placed onto the moulded head section
and the retainer. The moulded head section is moved via
a pneumatic cylinder until the full face mask is positioned
securely on the head.
The test device has a nebuliser that holds water for
approx. 130 tests.
The test device is operated via a PC. The software included
with the device guides the user through the test steps and logs
the test results. The test results can be saved and printed.
Test date monitoring ensures that the inspection intervals are
observed.
The following optional accessories are available:
Bracket for mask/helmet combinations to fasten a mask

with mask/helmet adapter on the test device
Dräger recommends using the following products for easier
operation:
Foot-operated switch with USB connection

Barcode scanner

Drägerware for the network installation

1
2
3
00131173.eps
Dräger Prestor 5000