Bosch Kiox BUI330 Instrucciones De Servicio Originales página 16

English – 14
sired assistance level appears on the display. To de-
crease the assistance level, press the – (11) button.
The requested drive power appears on the dis-
play h (see "Start page", page English – 16). The
maximum drive power depends on the selected assis-
tance level.
If the on-board computer is removed from the holder
(5) and reinserted, the on-board computer always
starts again at the assistance level OFF.
Switching the push assistance on/off
The push assistance aids you when pushing your
eBike. The speed of this function depends on the se-
lected gear and can reach a maximum of 3.7 mph.
The push assistance function must only be used
u
when pushing the eBike. There is a risk of injury if
the wheels of the eBike are not in contact with the
ground while using the push assistance.
To activate the push assistance, briefly press the
WALK button on your on-board computer. After acti-
vation, press the + button within 10 s and keep it
pressed. The eBike drive is switched on.
Note: The push assistance cannot be activated at as-
sistance level OFF.
The push assistance is switched off as soon as one of
the following occurs:
– You release the + button (12);
– the wheels of the eBike are locked (e.g. by applying
the brakes or hitting an obstacle);
– the speed exceeds 3.7 mph.
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.
Do not activate push assistance function while
u
riding on the bike. Only use push assitance func-
tion when pushing the eBike.
Switching bicycle lights on/off
On the model in which the lighting is powered by the
eBike system, the front and rear lights can be
switched on and off at the same time via the on-board
computer using the bike lights button (3).
1 270 U20 XBK | (14.03.2023)
Before starting each journey, check that your bike
lights are working correctly.
If the lighting is switched on, the bike light indicator c
(see "Start page", page English – 16) lights up in the
status bar of the display.
Switching the bike lights on and off has no effect on
the backlighting of the display.
Creating a user ID
In order to be able to use all the functions of the on-
board computer, you must register online.
With a user ID, you can analyze your ride data, plan
offline routes and transfer these routes to the on-
board computer.
You can set up a user ID via your Bosch eBike Con-
nect smartphone app or simply at
www.ebike-connect.com. Enter the details required
for registration. The Bosch eBike Connect smart-
phone app is available to download free of charge
from the App Store (for Apple iPhones) or from the
Google Play store (for Android devices).
Connecting the On-Board Computer with
the Bosch eBike Connect App
Follow these steps to establish a connection to your
smartphone:
– Load the app.
– Select the tab <My eBike>.
– Select <Add new eBike device>.
– Add Kiox.
The app will then display an instruction to press and
hold the bike lighting button (3) on the on-board
computer for 5 seconds.
Press and hold the button (3) for at least 5 seconds.
The on-board computer automatically activates the
Bluetooth® Low Energy connection and switches to
pairing mode.
Follow the instructions on the screen. Once pairing is
complete, the user data is synchronized.
Note: The Bluetooth® connection does not need to be
activated manually.
Bosch eBike Systems