Publicidad
MOTION SENSOR INSTALLATION: Fixed Adapter Arm Mount
Punch out the photocell knock-out on the fixed adapter arm bracket with a hammer. Follow STEPS 1 – 4 on page 8. Install
motion base and waterproof gasket on the fixed adapter arm bracket, then tighten screws. Screw the microwave or infrared
sensor into sensor base. Follow STEPS 6A or 6B on page 9 to complete installation.
NOTE: See below for motion sensor wiring diagram.
WIRING DIAGRAMS
• Without Photocell and Motion Sensor
• With Photocell
• With Motion Sensor
10
Publicidad
