Publicidad
INSTALLATION: Slip-Fitter Mount
STEP 1: Unscrew to remove the cover of junction box
of slip-fitter bracket, pass the wires out from pole
through slip-fitter bracket.
STEP 3: Pass the fixture's wires through the slip-fitter
bracket into junction box.
STEP 5: Connect the wires from pole to fixture's AC
input wires, L to L (Black-Black), N to N (White-White),
PE to PE (Green-Green); Connect dimming wires if
desired. Use connectors to connect [Dim + ] to fixture's
[Dim + ] (Purple), [Dim – ] to fixture's [Dim – ] (Pink), then
put all the wire inside of junction box.
STEP 2: Assemble the slip-fitter bracket on the pole,
tighten the fixing screws to lock with a wrench.
STEP 4: Hang the fixture body on the slip-fitter bracket,
then tighten the fixing screws to lock the fixture body
with a wrench.
STEP 6: Install the cover back to junction box, tighten
the screw with a wrench.
3
Publicidad
