American Standard Aspirations 7061461 Manual Del Propietário página 4

3
INSTALL WALL SPOUT
• Remove PLASTER GUARDS (1, 1a) from
VALVE BODY and SPOUT NIPPLE (2).
• Apply thread sealant to SPOUT NIPPLE (2).
• Thread SPOUT MOUNT (3) onto SPOUT
NIPPLE (2) using a 10 mm Hex Wrench.
Tighten completely.
• Install SEAL (4) into SPOUT ESCUTCHEON (5).
Place SPOUT ESCUTCHEON (5) with SEAL (4)
onto SPOUT (6). Fig. A
• Push SPOUT (6) onto SPOUT MOUNT (3).
Align SPOUT (6) and tighten SPOUT SET
SCREW (7) with 2mm HEX WRENCH (8)
supplied. Push SPOUT ESCUTCHEON (5)
against finished wall.
• Push valve escutcheon (9, 10) on to VALVE (11)
against the finished wall. Fig. B
4
INSTALL HANDLES
• Push VALVE STEM (1) down to off position.
• Attach HANDLE ADAPTER (2) to VALVE STEM (1)
withADAPTER SCREW (3). Tighten fully.
• Install HANDLE (4) onto VALVE STEM (1) and tighten
SET SCREW (5) with 2.5mm HEX WRENCH (6)
supplied.
3
1
10mm HEX
WRENCH
1a
Fig. A
4
5
6
6
5
4
APPLY
SEALANT
2
3
11
6
7
8
9
Fig. B
10
3
7
1
2