Publicidad
Idiomas disponibles
Idiomas disponibles
FEEDING
proficontrol
CLEANING AND MAINTENANCE
Before cleaning and servicing, ensure that the device is switched off and unplugged from
the power source.
The housing of the proficontrol
tic feeders must be cleaned at regular intervals. The cleaning interval depends heavily
on the degree of soiling. The degree of pollution can vary significantly depending on the
body of water and the environment. Do not use any sharp-edged objects for cleaning, e.g.
Steel brushes, use a soft sponge instead. Damage caused by soiling is excluded from the
guarantee. The user has to properly maintain and clean the devices depending on the
amount of dirt.
WEAR PARTS
Use with contaminated solids and particles also leads to premature wear and has a nega-
tive impact on the service life of the devices. Wear parts are excluded from the guaran-
tee. Appropriate cleaning and care reduce wear and tear on the device.
REPAIR
If the cables or the housing are damaged, proficontrol
repaired and must therefore be replaced or sent in.
If you have any questions or problems, please contact a qualified electrician or your spe-
cialist dealer for your own safety.
STORAGE
If frost is expected, the device must be taken out of service and dismantled. First clean
the device as described under Cleaning and Maintenance. The device must be stored dry.
Make sure that the device is stored frost-free.
DISPOSAL
The device must be disposed of in accordance with national legal regulations. This device
must not be disposed of as domestic waste. Make the device unusable by cutting the
cable and dispose of it via the return system provided.
If the device contains light sources, they must be disposed of using the return system
provided for this purpose.
Ask your specialist dealer.
10
Observe the relevant product videos on the subject of
nance
in our Youtube channel:
GENERAL
GENERAL
control and the profifeed automa-
https://www.youtube.com/user/FIAPGmbH
cleaning and mainte-
GENERAL
control cannot be
GB
Publicidad
