Fiap proficontrol GENERAL Instrucciones De Uso página 8

FEEDING
proficontrol
All work with this device may only be carried out in accordance with these instructions.
The combination of water and electricity can lead to serious danger to life and limb if it is
not connected properly or handled improperly.
Only operate the device when nobody is in the water!
Before reaching into the water, always pull out the mains plug of all devices in the water.
Compare the electrical data of the power supply with the type plate on the packaging or
on the device. Make sure that the device is protected by a residual current device with
a rated residual current of maximum 30 mA. Only operate the device from a properly
installed socket. Keep the power plug and all connection points dry! Lay the connection
cable so that it is protected to prevent damage. Only use cables, installations, adapters,
extension or connection lines with protective contact that are approved for outdoor use.
Do not carry or pull the device by the connecting cable! The device must not be operated
if the cable or housing is defective! If the power cord of the device is damaged, the device
must be disposed of; it is no longer possible to replace the power cord. If the cable is da-
maged, the device must be disposed of. Electrical installations on ponds must comply with
international and national installation regulations. Never open the housing of the device or
its associated parts unless this is expressly stated in the instructions for use.
Never make technical changes to the device, this leads to the immediate expiry
of all warranty and guarantee claims.
Use only original spare parts and accessories. Have repairs carried out only by authori-
zed customer service centers.
For your own safety, contact a qualified electrician if you have any questions or problems!
Caution, LED light: do not look into the LED light beam! Do not look at it directly
or with optical instruments!
INSTALLATION AND COMMISSIONING
The device, proficontrol
fifeed BreedingFeeder, profifeed ScrewFeeder). The automatic feeders
connected to the proficontrol
controlled accordingly depending on the motor type. The activated channel is indicated by
a channel LED.
The following profifeed automatic feeders can be connected:
profifeed BreedingFeeder
ScrewFeeder
profifeed
ScrewFeeder
profifeed
All work with this device (proficontrol GENERAL) may only be carried out in accor-
dance with these instructions.
8
GENERAL
GENERAL
can operate up to 4 automatic feeders (pro-
GENERAL
control are automatically recognized and
with distribution
GB