Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use the appliance
6mm
The following symbols will appear on the control panel, next to each control handle:
Black circle: gas off
Large flame: maximum setting
Small flame: minimum setting
The minimum setting is at the end of the anti-clockwise rotation of the control handle.
All operation positions must be selected between the maximum and minimum position.
The symbol on the control panel,next to the control handle will indicate which burner it
operates.
Automatic ignition with flame failure safety device
The appliance is fitted with a flame failure safety device on each burner, which is
designed to stop the flow of gas to the burner head in the event of the flame going out.
To ignite a burner:
○
Press in the control knob of the burner that you wish to light and turn it anti-clockwise to
the maximum position.
○
Burner ignition
1> Choose the knob of the burner that you want to light.
2> Ignition can be manual or electric.
Manual ignition (only for some models, please refer to the description of the appliance):
Flame to the air outlet，turn the knob of the burner you want to light up to maximum
position, until the burners light.
Electric ignition (only for some models, please refer to the description of the appliance):
Press the ignition botton and at the same time turn the knob counterclockwise until the
burners light.
If you keep the control knob depressed, the automatic ignition for the burner will operate.
○
You should hold down the control knob for 15 seconds after the flame on the burner has
lit. If after 15s the burner has not lit, stop operating the device and open the compartment
door and/or wait at least 1 min before attempting a further ignition of the burner.
○
After this 15-second interval, to regulate the flame you should continue turning the
control knob anti-clockwise until the flame is at a suitable level. The operating position
MUST be at a position between the maximum and minimum position.
○
To switch the burner off, turn the control knob fully clockwise to the gas off position.
○
In case of power failure, the burners can be lit by carefully using a match.
3mm
10
CPGS423X
Publicidad
