Publicidad
INSTALLATION
Hang 2 Gripple Metal Wire Rope Kits
1
(VN-GC-KIT-5/10) per VYNE fixture from the
support structure.
A. Insert the wire rope into the middle hole of
the Gripple.
B. Slide the Gripple along the wire rope and
loop the cable around the support structure.
C. Then, insert the wire rope end into the
Gripple opposite middle hole to form a loop.
The formed loop will be used to adjust the
fixture mounting height.
2
Adjust the VYNE fixture mounting height.
A. Lift the weight of the VYNE off of the Gripple and push the release
button in the same direction of the wire entrance.
B. While the button is pressed, adjust the wire rope until the VYNE fixture
is level. When the desired position is reached, release the button to
lock in place.
Never try to adjust the Gripple while the weight of the VYNE is still applied.
Remove the VYNE fixture
3
and the included hangers
from the box. Gather any
ordered accessories.
Hang the VYNE fixture.
4
A. Orient the fixture so that the Fluence logo is on top (4a).
B. Using two people, hang the first end of the fixture as shown(4b). Hook the squared end of the hanger onto the cable fixed loop (4c). Hook
the rounded hook of the hanger onto the end cap of the fixture facing inward (4d).
C. Repeat Step B to hang the other end of the fixture (4e).
4b
4a
Note:
Fluence logo to be
on top; product not
symmetrical.
4
1a
4e
4c
1b
2a
4d
1c
2b
4e
Publicidad
