Publicidad
Idiomas disponibles
Idiomas disponibles
DO213SV
We advise replacing the filters regularly to ensure an optimal operation of the
machine. Dirty filters will reduce the suction power drastically. After every cleaning,
clean the dust reservoir and the filter to extend the life span of your machine.
Cleaning the floor brush:
1. Remove the floor nozzle from the upright vacuum
cleaner. Press the release button at the back of the floor
n¬ozzle and remove it from the machine.
2. Turn the release under the floor nozzle to the left using a
screwdriver or coin, and remove the closure flap.
3. Remove the rotating floor brush from the floor nozzle.
4. Remove hairs and other dirt that have wrapped around
the floor b-rush. If you do not clean the floor brush
regularly, it will become damaged and your machine will become unusable.
5. The rotating floor brush may be rinsed off under running water. Make sure that it is
completely dry before using it.
6. Place the floor brush back into the floor nozzle when it is clean.
7. But the closure flap back in place and secure by turning the release clockwise.
8. Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can damage the machine or your floor. Always remove the hairs stuck on
the brushes.
Cleaning the machine:
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never
submerge the machine in water!
Storing the machine:
•
Store the machine in a dry and clean place. Avoid extreme temperatures and long-
term exposure to sunlight.
•
To store the machine in a compact manner, you can fold up the stick by pressing
on the button.
40
Publicidad
