Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
–
With the roller – Use it on surfaces that scratch easily, in addition to hard or smooth
surfaces, such as parquet flooring or tiles to vacuum up hair, dust and larger debris,
e.g. cat litter.
–
Directly attach the floor brush (or roller brush, depending on the floor surface being
cleaned), to the handheld vacuum cleaner in order to be able to easily vacuum the
stairs. The LED indicators on the floor brush are useful for poorly lit areas.
NOTE: Please refer to the Cleaning and maintenance section for the instructions
regarding changing the head of the floor brush.
Mini brush – Use the brush with or without the bristles to remove stubborn dirt from
•
furniture, floors and carpets.
•
Crevice tool – Use the brush with or without the bristles to remove dirt from tight or
hard-to-reach corners.
Press the button on the mini brush and slide the brush up or down to use the bristled
or felt section of the brush.
To disassemble:
•
Make sure the unit is switched off.
Detach the tube from the floor brush or handheld vacuum by pressing the appropriate
release button and pulling the two components apart.
•
The mini brush or crevice tool can be removed by twisting and pulling them apart.
Slide the unit onto the wall bracket hook to stow it away. Secure the accessories in the
slots as shown.
Operation
•
Once the unit is assembled, it is ready for use.
Press the Power button to turn on the vacuum. The LED indicators will light up when
the vacuum is on.
Press the High/low speed button as required to switch from a high power level to a
low power level and vice versa.
To turn off the vacuum, press the Power button again.
WARNING: Moving Parts!
•
Always turn off the vacuum before attaching or changing accessories.
NOTE: For best performance, empty the dust cup when it is full or after each use
(as shown in the Cleaning and maintenance section).
20
EN
Publicidad
