Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Cleaning the floor brush
Use a coin to turn the screw anticlockwise towards the unlock symbol
Lift up the clip that secures the right side of the brush in place.
Pull the right side of the brush, then slide the left side off the pin that holds it in place.
NOTE:
•
Regularly remove all hair, fur and debris to ensure your vacuum cleaner
maintains its optimal performance. If the brush is very dirty, wash it with
water and let it dry completely.
•
Use a damp cloth to clean the floor brush's housing. Do not immerse it in
water.
Cleaning the wheel axles
Insert a screwdriver under the wheel axle and push up to pry and consequently,
dislodge it. Remove any wires or other objects that may have become lodged in the
wheel axles.
Reassemble the wheels by pushing them firmly into the recess.
Cleaning the accessories
Separate the tube from the accessories or the handheld vacuum. Remove any obstructions
and wash with water. Dry thoroughly before using the unit again or putting it away for a long
period of time.
Cleaning with the multi-purpose tool
When cleaning any part of the vacuum, the multi-purpose tool can be used to remove dust
and debris from any of its hard-to-clean areas, such as the filters and their compartments.
Troubleshooting
Problem
The unit does not
work.
Possible Cause
• The unit is not
charged.
• The charging
indicators do not
light up while
charging.
• The dust cup is full.
22
Solution
• Fully charge the battery.
• Check that the charger is securely
plugged into the mains socket and the
battery charging port. Check that the
filters are secure, and nothing is loose.
Press the Power button. If the unit is
still not working, get it checked by a
qualified technician.
• Empty the dust cup.
EN
.
Publicidad
