Descargar Imprimir esta página

LIVARNO home 1002-W Instrucciones De Uso Y De Seguridad página 48

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
8 years and over, as well as by persons
with limited physical, sensory or mental
abilities or lacking in experience and
knowledge if they have been supervised
and instructed as to the safe use of the
product and understand the resulting
hazards. Do not let children play with the
product. Cleaning and maintenance may
not be carried out by children without
proper supervision.
SUFFOCATION RISK! Keep the product,
packing/protective foil and small parts
away from children. Children may swallow
small parts or protective foil and choke or
suffocate on them.
Do not use the product if you notice any
damage.
The LEDs are not replaceable. Once the
light source reaches the end of its service
life, the product must be replaced.
RISK OF ELECTRIC SHOCK!
Incorrect electrical installation or a
power supply voltage that is too
high can potentially cause electric shocks.
Installing this product involves working on
the mains electricity supply so it may only
be carried out by a competent person
according to the national regulations for
installation and connection in the country of
use.
Never tamper with or modify the product.
If the product has any identifiable faults,
stop using it immediately.
Do not open up the casing and only have
the product repaired by qualified
professionals. To that end you should
contact a specialist repairer. No liability or
warranty claims are accepted in cases
where repairs have been carried out by
unauthorised persons or the product has
been incorrectly wired or used.
The manufacturer/distributor of this product
accepts no responsibility whatsoever for
personal injury or damage resulting from
incorrect installation or use.
Do not exceed the specified mains voltage
48
GB/IE/NI/CY/MT
(see "Technical data").
Do not immerse the product in water or any
other liquids.
Keep the product away from naked flames
and hot surfaces.
Install the product in a position where it will
be protected from rain.
Before starting installation, cleaning or
maintenance work or if ever a fault occurs,
remove the mains fuse or switch off the
circuit-breaker for the circuit. Use a voltage
tester to check that the product is isolated
from the power supply.
RISK OF INJURY! Incorrect handling of
the product may potentially result in
personal injury.
Any protective cover that is split or cracked
must be replaced.
Never look directly into the light source.
Never point the light into the eyes of other
people or animals.
PLEASE NOTE! Incorrect handling of the
light may lead to damage to the product.
Check the screw fixings at regular intervals.
z Assembly and installation
Please note: remove the product from its
packaging.
Check that all package contents are
present.
Check if the product or individual parts are
damaged. Should you detect damage, do
not use the product. Please contact the
retailer via the service address indicated.
Choosing the installation position
Fix the outdoor spotlight at a height of 2-3m
„ „
to a sturdy wall that is not subject to
vibration.
Only install the outdoor spotlight outside of
„ „
the hand-contact zone so as to prevent it
being touched.
Position it at least 20cm away from other
„ „
objects so as to ensure good ventilation.

Publicidad

loading

Este manual también es adecuado para:

1002-g