Publicidad
Idiomas disponibles
Idiomas disponibles
Base del operador (Ver Fig. 3)
After the concrete has held, mount the gate motor base to the concrete pad. Check that the base is level correctly. Using
the bolts, washers, mount the gate motor to the base and insert the cover. Check the operator and make sure it is aligned
with the door.
Main engine installation
• Dismantle the plastic housing on the main engine before installation and keep relevant fasteners properly;
• Please prepare the power line for connecting the mounting plate to the main engine (the number of power supply cable
cores should not be less than 3 PCS, the sectional area of cable core should be over 1.5mm² and the length should be deter-
mined by users according to the situation on installation spot)
• Please unlock the main engine before installation, the unlock method is: insert the key, and open the manual release bar
till it rotates by 90° as shown in Figure 5. Then turn the output gear and the gear can be rotated easily;
KEEP WORKiNG
Keep Working
Motor
Gear
Terrain limit
Input power
Nut
Spring washer
Washer
Nut
Fig 3.
04
M C
5
Publicidad
