Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Regular maintenance is recommended. Follow these instructions
for daily maintence
Cleaning the filters
Allen wrench
(medium)
Cover plate
Check valve
at cold side
Shut
Open/Shut
Filters with
caps
Check valve
at hot side
Unscrew
Filter
(Hot)
Filter
Always confirm that check valve and filter with cap at Hot side
cold down before taking the filter out for cleaning
Critical
Screw
tool.
Screw
Filter
(Cold)
Cap
Open/shut tool
Brush
1. Unscrew the screws (3
locations) with a hexagon
wrench, and remove the
lower right cover plate.
Use the open/shut tool to
shut off the check valves,
of the Shower Tower.
2. Insert the open/shut tool
into the cap groove of the
filters, then take out the
caps and filters slowly.
There are filters at both the cold
and hot sides.
Check if the filter on the hot side
is not hot before taking the filter out.
3. Use the brush to clean dirt
and debris from filters.
4. Install the filter and turn on
the check valves.
5. Use screws to reinstall the
cover plates.
Main
tena
nce
11
Publicidad
