Publicidad
Idiomas disponibles
Idiomas disponibles
Confirm the temperature of the water output
If the temperature handle is different from the factory setting (supply water
temperature and static pressure), the water temperature will not be same as
indicated.
When this happens, check on the following key points.
Temperature control
handle
Volume control
Push button
for hand shower
Push
104° F
7
Before Use
Mark
handle
Hand shower
Set temperature on the hot
1.
water device
Set the temperature on the hot
water device 68°F higher that the
outflow temperature.
To prevent scalding due to
malfunction, the recommended
hot water temperature is 140°F
2. Set the mark of temperature
handle to "104" on the scale.
3. Turn the flow lever to the
highest position.
4. Push the ON/OFF button of
hand shower
Water should run out of the hand
shower.
5. Check outflow temperature.
If the outflow temperature is
appropriate (about 104
use the product normally.
If the outflow temperature is
inappropriate, refer to P.8 to set
the temperature handle correctly.
Tips
For safety reasons, the product is
equipped wth a function that keeps
scalding water from running, If set
correctly, themaximum temperature
°
is about (113
F).
.
.
.
°
F), then
Publicidad
