Front Runner FAVT001 Instrucciones Para El Montaje página 3

Fit the foot rails
( A ) If you are installing a Full Rack remove all the OEM Plastic Button Head Bolts, but if you are installing a
Half Rack Remove the rear Bolts (III and IV) on the left and right hand side of the vehicle.
( I )
Use a 4mm Hex Key to remove the above identified Bolts from the roof channel.
( b )
Clean the area around each of the threaded mounting points and apply a silicone bead on each point.
( C )
Place a Spacer (Item 11) over each of the mounting points. The Spacers are symmetrical therefore it does
not matter which way round you place the spacer into the Channel.
FAVT001_REV_A00
( II )
3
( III )
( ) I
( IV )