Publicidad
Idiomas disponibles
Idiomas disponibles
Operating instructions
O R I G I N A L
Depósito legal y Copyright 2006. Todos los derechos reservados.
3.12 - Before using the lift, check the state of
the cable. The cable should not contain
broken threads or show any signs of crushed/
flattened areas. NEVER use faulty cables,
always change them if there is any doubt.
Only use steel cables reference: DIN 3060.
Quality: 180KG/mm and torsion resistant.
3.13 - NEVER take apart the crank of the
winch when the lift is carrying a load or
extended.
-25
3.14 - The minimum load to avoid problems
regarding the breaking mechanism is 25KG.
Without this load the brake will not work.
3.15 - Do not grease or lubricate the winch's
breaking mechanism. The brake disks have
been greased with a special heat and
pressure resistant solution. Other products
should not be used to avoid negative effects
regarding the braking mechanism.
3.16 - All sections must be lowered during
transportation.
3.17 - Only original replacement parts should
be used.
ENGLISH
Publicidad
