Tabla de contenido
Publicidad
Instruction Manual / Betriebsanleitung / Livret d'Instructions / Manuale Istruzioni / Manual de instrucciones
ADJUSTMENTS AND FEATURES ON FUTURA SERIES
Refer to
Fig. 1-2-3.
POS. 1:
POS. 2:
POS. 3:
POS. 4:
POS. 5-6:
POS. 7:
POS. 8:
POS. 9:
POS. 10:
GB
POS. 11:
POS. 12:
POS. 13:
POS. 14:
POS. 15:
POS. 16:
POS. 17:
POS. 18:
POS. 19:
POS. 20:
POS. 21:
POS. 22:
POS. 23:
POS. 24:
POS. 25:
POS. 26:
Bull eye hook to move the generator.
Wire speed and voltage step relation table.
(It help to find easely the wire speed value in relation to voltage step).
MIG/MAG torch connector. (Includes: power output, GAS outlet and torch
switch connection).
Negative output sockets (-). Low or high inductance.
Voltage Switches: these switches are positioned on the front panel of the
machine.They allow the selection of the arc voltage. Switch (6) selects the
main voltage regulation and (5) the fine voltage regulation.
Front panel control board
Protection motor fuse.
Power Source Main Switch "ON - OFF".
In-let GAS connector.
Power supply cooler unit connection plate.
Power input cable.
GAS tank position slot.
Gas tank securing chain.
Wire spool support.
Wire guiding fitting.
Wire feeding rolls.
Upper rolls support levers.
Securing and pressure knob in order to give the correct pressure to the wire.
Quick release connectors for inlet (blue) and outlet (red). (OPTIONAL).
14 pins socket for MIG/MAG wire feeder connection.
Power output for MIG/MAG wire feeder.
Auxiliary votage fuses protection.
Interconnecting cables securing plate.
Positive input (+) power socket.
Interconnecting cables 14 pins socket.
(See page 16).
FUTURA SERIES
11
Publicidad
Tabla de contenido
