Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Peripheral Equipment
You can operate other manufacturers' components using this TV's remote control.
Caution
•
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
This procedure searches all codes and is called the "sequence method."
After step
above, change the code and
test
change
Operate the equipment with the
remote control (p. 32)
•
Repeat until the code is found
•
It may take many attempts before the correct
code is found
1
Connect the external devices to the TV and
turn Off the external equipments
2
+
3
4
5
To find a code not listed in the code list
Press both buttons simultaneously
for more than 3 seconds.
•
Release the buttons when the equipment selection
buttons start flashing.
Select the equipment
with the equipment selection button
•
The selected button remains lit (other buttons are not
lit).
Input the equipment's 4-digit remote
control code
(p. 33-34)
Confirm the equipment with the
remote control
•
The external equipment turns On.
■
If the equipment does not operate with
remote control
•
When your equipment has a single code
Input the remote control code again
•
When your equipment has multiple codes
Change the code with
(p. 33-34)
When the correct code is found
store
above and test again
29
Publicidad
