Sun Microsystems GDM-5410 Manual página 10

Adjusting the convergence
(CONVERGENCE)
The CONVERGENCE settings allow you to adjust the quality of
the picture by controlling the convergence. The convergence
refers to the alignment of the red, green, and blue color signals.
If you see red or blue shadows around letters or lines, adjust the
convergence.
These settings are stored in memory for all input signals.
1
Press the button.
The main MENU appears on the screen.
Press the m/M buttons to highlight
2
CONVERGENCE and press the
The CONVERGENCE menu appears on the screen.
First press the m/M buttons to select the desired
3
adjustment item. Then press the </, buttons to
make the adjustment.
Select To
horizontally shift red or blue shadows
vertically shift red or blue shadows
vertically shift red or blue shadows at
TOP
the top of the screen
V CONVER TOP
vertically shift red or blue shadows at
BOT
the bottom of the screen
V CONVER
BOTTOM
Adjusting the quality of the picture
(SCREEN)
The SCREEN settings allow you to adjust the quality of the
picture by controlling the moire and landing.
• If the color is irregular at the corners of the screen, adjust the
landing.
• If elliptical or wavy patterns appear on the screen, cancel the
moire.
The CANCEL MOIRE and MOIRE ADJUST settings are stored
in memory for the current input signal. All other settings are
stored in memory for all input signals.
1
Press the
button again. The main MENU appears on the screen.
Press the m/M buttons to highlight
2
press the
The SCREEN menu appears on the screen.
First press the m/M buttons to select the desired
3
adjustment item. Then press the </, buttons to
make the adjustment.
Select
LANDING
LANDING
LANDING
LANDING
CANCEL MOIRE*
MOIRE ADJUST
• Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
Note
The picture may become fuzzy when CANCEL MOIRE is set to ON.
button.
button again.
To
reduce any color irregularities in the
screen's top left corner to a minimum.
reduce any color irregularities in the
screen's top right corner to a
minimum.
reduce any color irregularities in the
screen's bottom left corner to a
minimum.
reduce any color irregularities in the
screen's bottom right corner to a
minimum.
turn the moire cancellation function
ON or OFF.
(MOIRE ADJUST) appears in
the menu when you select ON.
adjust the degree of moire
cancellation until the moire is at a
minimum.
Example of moire
SCREEN and
EN
11