Connecting The Headphone System; Connecting The Processor To Digital Components - Sony MDR-DS1000 Manual De Instrucciones

1 Connection

Connecting the Headphone System

Connecting the processor to digital
components
Use the supplied optical digital connecting cable to connect the optical digital output
jack* on a DVD device or other digital component to the DIGITAL IN jack of the
processor.
Processor
To DIGITAL IN
jack
Notes
• The optical digital connecting cable is an extremely high-precision device and is sensitive to
jolts and external pressure. Therefore, be careful when inserting and removing the cable plug.
• The digital input for the processor does not support sampling frequencies of 96 kHz. Set the
digital output setting of the DVD device to 48 kHz when using this system. Noise may be
heard when a 96 kHz digital signal is input.
* If the connected equipment supports PCM output only, all surround sound effects will be
processed by DOLBY PRO LOGIC II.
DTS
• A DTS-compatible DVD device is required for playback of DVDs recorded in DTS audio. (For
more details, see the instruction manual of your DVD device.)
• When playing CDs recorded in DTS format, noise may occur when fast forwarding or
rewinding. This is not a malfunction.
• If the DTS digital output is set to "OFF" on the DVD device, no sound may be heard even if the
DTS output is selected in the DVD menu.
• No sound may be heard when a DVD device and this unit is analogue-connected. In this case,
use a digital connection.
GB
8
Connection
To optical digital
output jack
Optical digital connecting cable (supplied)
Match the orientation of the plug with the
jack, and then insert until the plug fits into
place.
DVD device or other digital
component having an optical
digital output jack