WEATHER ALERT SETTING
Weather Alert can alert you of certain weather conditions. Once the alert criterion is met, the
alarm sound will activate and the LCD's alert icon will flash.
TO SET ALERT
1. Press [ ALERT ] to select and display the desired weather alert reading in the sequence
listed in the table below:
Alert reading Sequence
Outdoor Temperature High Alert
Outdoor Temperature Low Alert
Outdoor Humidity High Alert
Outdoor Humidity Low Alert
Indoor Current Channel
Temperature High Alert
Indoor Current Channel
Temperature Low Alert
Indoor Current Channel
Humidity High Alert
Indoor Current Channel
Humidity Low Alert
Average Wind Speed
Feels Like High Alert
Feels Like Low Alert
Dewpoint High Alert
Dewpoint Low Alert
Heat Index High Alert
WindChill Low Alert
UV index High Alert
Light intensity High Alert
Pressure Drop
Hourly Rainfall
2. Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert
setting and the alert reading will flash.
3. Press [
] or [
4. Press [ ALERT ] key to confirm the value.
5. Press [ ALARM ] key to toggle the regarding alert on / off.
6. Press [ ALERT ] key to shift to next alert reading.
Alert on
7. Press any key on the front side to save alert on /off status and back to normal mode, or it
will automatically back to normal mode after 30 seconds without pressing any key.
TO SILENCE THE ALERT ALARM
Press [ALARM / SNOOZE] key to silence the alert alarm or let the alarm automatically turn off
after 2 minutes.
Setting Range
-40°C ~ 80°C
1% ~ 99%
-40°C ~ 80°C
1% ~ 99%
0.1m/s ~ 50m/s
-65°C ~ 50°C
-40°C ~ 80°C
26°C ~ 50°C
-65°C ~ 18°C
0.01 ~ 200.0Klux
1hPa ~ 10hPa
1mm ~ 1000mm
] key to adjust the value or press and hold the key to change rapidly.
High / Low
Alert on
Display Section
Outdoor temperature &
Indoor CH temperature
Wind direction & speed
Weather index
1 ~16
UV & light intensity
26
humidity
& humidity
Barometer
Rainfall
Alert off
Alert off
Default
40°C
0°C
80%
40%
40°C
0°C
80%
40%
17.2m/s
20°C
0°C
10°C
-10°C
30°C
0°C
10
100Klux
3hPa
100mm