Explore Scientific WSX3001 Manual De Instrucciones página 8

Step 2:
Fasten the stainless steel pole on
your fix pole (purchase separately)
with U-bolts, pole mounting clamps
and nuts.
MOUNTING POLE AND DIRECTION ALIGNMENT
Install the wireless 7-IN-1 sensor in an open
Install the wireless 7-IN-1 sensor in an open location
location with no obstructions above and around the
with no obstructions above and around the sensor for
sensor for accurate rain and wind measurement.
accurate rain and wind measurement. Install the sensor
Install the sensor with the smaller end facing the
with the smaller end facing the North to properly orient
North to properly orient the wind direction vane.
the wind direction vane. Secure the mounting stand and
Secure the mounting stand and bracket (included)
bracket (included) to a post or pole, and allow minimum
to a post or pole, and allow minimum 1.5m off the
1.5m off the ground.
ground.
Add rubber
pad before
Add rubber
mounting on
pad before
pole or post
mounting on
pole or post
Fixed pole
(not included)
8
Fixed pole
Fixed pole
package not
(not included)
included
Point to
Point to
NORTH
NORTH
1.5 meter
1.5 meter
off the
off the
ground
ground