Cembre SD-15P-ECO Manual De Uso Y Mantenimiento página 5

ENGLISH
1.3) Attachment pin for support trolley: to mount the machine on the support trolley, also
useful as a handle for transporting the machine.
1.4) Adjustable depth gauge: a graduated scale on the fi xed guard enables the desired hole
depth to be set, which automatically stops the travel of the auger.
1.5) Adjustable main handle: the handle controlling the drilling machine during operation,
can be fi xed in two diff erent positions.
Incorporated, on the right hand side are the machine controls:
– "ON/OFF" switch.
– Accelerator.
– Accelerator lock button.
1.6) Fixed guard: stainless steel guard protecting the spindle, featuring a graduated depth
gauge.
1.7) "MND" spindle: featuring an automatic quick lock mechanism suitable for augers with Ø
14 mm shank.
"MND 1" spindle, available as an optional accessory, is suitable for augers with Ø 16 mm shank.
1.8) PRM-UN detachable guard: stainless steel telescopic element, controlled by the return
springs, which provides protection for the auger. The lower end is threaded for attachment of
the TPM..N end piece.
1.9) TPM... N end piece: threaded centering device for attachment to the PRM-UN guard.
Alternative end pieces are available, with diff erent diameters (see § 3.2).
1.10) Return springs: to assist the retraction of the auger from the sleeper on completion of
the drilling operation and to reduce operator eff ort.
1.11) Forward/reverse selector (ONLY SD-15PR-ECO): allows reverse the rotation direction of
the spindle to disengage the auger when blocked in the wooden sleeper (see § 4.1.5).
2. ACCESSORIES SUPPLIED WITH THE DRILLING MACHINE
The drill is supplied complete with the
"Accessories Kit" code: 6001554, containing:
– 1 pc 4 mm Allen key.
– 1 pc spark plug key.
– 1 pc measuring cylinder for fuel preparation
5