Remote Or Manual Operation - Ampro TECSHOW STRATUS 1000 Manual De Usuario

While operating the Stratus 1000, make sure there
is adequate fog fluid in the machine to prevent
pump and heater damage. When the fog fluid level
5. OPERATION

Remote or Manual Operation

The Stratus 1000 can be operated manually, or with
the included wired manual remote control (FC-M).
The Manual button is located on the rear of the
unit. See the product Overview. Additionally, the
product can be operated with the included wireless
remote (FC-W) or the optional wired timer control-
ler (FC-T).
Wired Manual Remote Control (FC-M)
1. Plug in the fog machine to power.
2. Plug in the wired manual remote control to the
Remote Connector socket on the back of the
fog machine. (See the product Overview.)
3. Wait for the READY indicator LED to light up,
indicating the Stratus 1000 is heated enough to
produce fog.
4. Press and hold the <FOG> button on the wired
manual remote control.
5. Release the button to stop the fog output.
FC-M Manual Remote Control Overview
becomes low, simply add more fog fluid to continue
using the Stratus 1000.
• The Stratus 1000 unit may start producing fog
intermittently to allow for fluid reheating after a
period of continuous fog output. This is a normal
occurrence.
• The duration of manual fog output is based on
the capability of the fog machine.
Wireless Remote (FC-W)
The FC-W wireless remote allows the user to trigger
the Stratus 1000 to produce fog from up to 100 ft
away. No extra receiver is required, as the product
has an internal receiver for the wireless remote.
1. Plug in the fog machine to power.
2. Allow the Stratus 1000 up to 3-4 minutes to
heat up.
3. Press and hold the <1> button on the wireless
remote.
4. Release the button to stop the fog output.
FC-W Wireless Remote Overview
• Ensure the FC-W has an unobstructed view of the
product for maximum performance.
• The <2>, <3>, and <4> buttons are reserved for
future use.
English version | Tecshow Stratus 1000
P. 7