Technical Information - Ampro TECSHOW STRATUS 1000 Manual De Usuario

6. TECHNICAL INFORMATION

Fogger Maintenance
Do not allow the fogger to become clogged. After
every 40 hours of continuous operation, use Am-
pro Fog Cleaner Quart (FCQ) through the system to
prevent the accumulation of particulate matter in
the heating element. The recommended cleaning
procedure is as follows.
1. Unplug the product from power.
2. Empty all fog fluid from the machine.
3. Add cleaning solution to the tank.
4. Connect the product to power and allow it to
warm up.
5. Run the unit in a well-ventilated area until the
tank is almost empty. Do not allow the pump to
run dry.
6. Refill with fogger fluid to continue using the
fogger. Run the machine briefly to clear any
remaining cleaning solution from the pump and
heater.
Do Not operate the machine without fluid at any
time.
Fog Cleaner Quart (FCQ) was specifically developed
by Ampro to clean your Stratus 1000. Make sure you
use FCQ regularly, no longer than 90 days between
cleanings, to increase the life of your product.
Storage
Before storing the fogger, run FCQ through the sys-
tem as described in the cleaning procedure above;
however, only follow steps 1 through 5. Do not refill
the tank with fog fluid if storing the fogger. Cleaning
the system prior to storage will help prevent any
particles from condensing inside the pump or heat-
er while not in use.
Test-run your Stratus 1000 on a monthly basis to
achieve the best performance.
English version | Tecshow Stratus 1000
P. 9