cecotec BONGO Z CITY Serie Manual De Instrucciones página 31

ENGLISH
fatigue, such as the chassis, fork, wheels, brakes, etc. This will allow you to detect cracks
or damage in high-stress areas that may indicate the component's service life has been
exceeded and it needs to be replaced. Regular maintenance of the electric scooter and its
components will extend its service life. Periodically check the tightness of the bolted parts,
especially the wheel axles, the folding mechanism, the steering system, and the braking
system.
- Contact your vendor to be referred to an appropriate training organisation.
- Avoid high traffic or overcrowded areas and anticipate your path and speed by respecting
the traffic code and watching out for pedestrians on pavements.
- Indicate your presence when approaching a pedestrian or cyclist and when you are not
seen and/or heard. Remember to cross protected areas on foot and in all situations take
care of yourself and others. Remove any sharp edges that may have been caused by the
use of the vehicle.
- Do not modify the use of the vehicle. This vehicle is not designed for stunt use.
2. PARTS AND COMPONENTS
Fig. 22
1. Handlebar grips
2. Handlebar
3. Brakes and bell
4. Accelerator
5. Power button
6. Handlebar base
7. Retaining strap
8. Control panel
9. Stem
10. Folding mechanism
11. Front reflector
12. Foldable bar
13. Front axle
14. Front-suspension base
15. Front fender
16. Front wheel
17. Front suspension
18. Front brake disc
19. Headlight
20. Side reflector
21. Side light cover
22. Platform
60 BONGO SERIE Z CITY
BONGO SERIE Z MOUNTAIN
ORIGINAL MANUAL TRANSLATION
23. Deck
24. Charger input
25. Taillight cover
26. Rear suspension
27. Lower rear-deck cover
28. Rear brake disc
29. Rear wheel
30. Rear fender
31. Number-plate holder
32. Taillight
33. Controller cover
34. Rear cover
35. Kickstand
Fig. 23
1. Power button: short press to turn the electric scooter on and long press to turn it off. A
short press with the electric scooter switched on will turn on the lights or turn them off
if they are on.
2. SET: short press on the touch icon to change the speed units.
3. MODE: short press on the touch icon to switch between the three modes or press and
hold to switch the cruise-control setting mode on or off.
4. LIGHT: press this touch icon to switch between the different light modes.
Fig. 24
1. Real-time current monitoring
2. Temperature
3. Speed
4. Light mode
5. Start mode
6. Drive mode
7. SET
8. Cruise control
9. Bluetooth
10. MODE
11. LIGHT
12. Total kilometrage
13. Battery
14. Real-time tension monitoring
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
ENGLISH
BONGO SERIE Z CITY 61
BONGO SERIE Z MOUNTAIN