cecotec BONGO Z CITY Serie Manual De Instrucciones página 32

ENGLISH
3. BEFORE USE
- This electric scooter comes in a packaging designed to protect it during transport. Take the
electric scooter out of its box and remove all packaging materials. You can keep the original
box and other packaging elements in a safe place. This will help you prevent product
damage when transporting it in the future. In case the original packaging is disposed of,
make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
Box contents
Fig. 25
1. Bongo Serie Z City/Bongo Serie Z Mountain electric scooter
2. Charger
3. Tools required for assembly
4. Instruction manual
4. PRODUCT ASSEMBLY
Note:
This electric scooter is delivered folded and with the handlebars removed, so you will need to
do a little assembly before it is ready for use.
Assembling the handlebar. Fig. 26
1. Adjust the brake levers to the desired height and secure them.
2. Align and insert the handlebar base into the handlebar fixing hole.
3. Adjust the direction and secure the handlebar with four screws.
Assembling the rear fender with number-plate holder. Fig. 27
1. Insert the rear fender into the rear suspension-link arms.
2. Pay attention to both sides of the mudguard when inserting it. It must be centred with the
holes in their correct position, left and right.
3. To attach the mudguard, screw it on both sides.
Kickstand. Fig. 28
The kickstand is located on the left side of the electric scooter. Push it down to unfold it.
Folding mechanism. Fig. 29
1. Pull the protective handle of the folding mechanism and simultaneously press the folding
plate into the stem.
62 BONGO SERIE Z CITY
BONGO SERIE Z MOUNTAIN
ORIGINAL MANUAL TRANSLATION
2. Lower the stem.
3. Hook the retaining strap onto the controller cover.
How to charge the electric scooter
1. Make sure the electric scooter is switched off before and during charging.
2. Connect the charger to the electric scooter's charging port and connect the charging plug
to a power outlet.
- Charge the electric scooter for at least 8 hours before first use.
- The charger's light indicator will change from red (charging) to green once charge is
complete.
- Never use the electric scooter while it is charging.
- Do not charge the electric scooter for longer than necessary.
- To maximise battery life, charge the battery at least every three months.
Note:
Stop charging the battery when the indicator colour changes. Do not exceed the battery
charging time so as not to affect its shelf life. Standard charging time is approximately 8 hours.
WARNING!
Cover the charging port with the dirt cap to prevent any metallic object from coming into
contact with it and to avoid short circuits.
5. OPERATION
Control panel
- Switch-on: short press the power button with the scooter switched off.
- Switch-off: long press the power button for 2 seconds.
- Driving mode: two consecutive short presses of the power button or one press on the
"MODE" button on the touch panel.
- Cruise control: to enable/disable cruise control, long press the "MODE" button on the touch
panel. The scooter will enter cruise control after maintaining speed for 5 seconds.
- Speed and distance units: press the "SET" button on the touch panel once.
- Lights: short press the power button with the scooter switched on or press the "LIGHT"
button on the touch panel.
1. OFF mode: the display indicator will be off. All lights will be off.
2. Mode 0: the display indicator will be on. Only the taillight stays on.
3. Mode 1: the display indicator will be on and show "1". Only the headlight will be on.
4. Mode 2: the display indicator will be on and show "2". The taillight and headlight will be on.
5. Mode 3: the display indicator will be on and show "3". The taillight, headlight, and side
light will be on.
ENGLISH
BONGO SERIE Z CITY 63
BONGO SERIE Z MOUNTAIN