Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
CHANGING THE BLADE
Use Roberts #10-460 9" Replacement
Blade. Use the provided Allen wrench
to remove the five screws, then hold the
blade at each end and carefully move
the blade out of blade holder.
Note: The flat side of the blade should
face the table.
WARNING: Do not put your fingers
against the sharp edge of the blade at
any time.
CARRY
Hook the chain to the ring on the handle
and carry the cutter as shown.
WARNING: Do not put your fingers
against the sharp edge of the blade at
any time.
- 4 -
Publicidad
