BGS technic 9866 Manual De Instrucciones página 13

REMOVAL
Before removing the special tool with the
injectors, check whether all injectors
have been completely removed from the
cylinder head. This can be seen on the
completely visible threads (1) of the sleeves.
Loosen screws and carefully remove the
special tool with injectors vertically
upward from the cylinder head.
Put down the special tool with injectors (1) flat
on a clean table.
Unlock the lock of the receptacle upward.
Turn the unlocked receptacle 90°.
Loosen injector downward and remove.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed