Lenco LPJ-900WH Manual Del Usuario página 16

HDMI1 interface corresponds to HDMI 1 in SOURCE mode, and HDMI2
interface corresponds to HDMI 2 in SOURCE mode.
4. Press the
HDMI HD signal input
- Using a MHL HDMI cable:
This projector is compatible with MHL cables: this means that you can
connect your smartphone or tablet (if MHL compatible) and stream in HD
from your smartphone or tablet to the projector with a MHL cable (not
included).
- Using a Chromecast dongle:
The HDMI connectors are compatible with the use of a chrome cast dongle
to enable you to stream wirelessly from your smartphone or tablet
Connecting an AV Source
Follow the picture below to connect a device with an AV cable.
1. Turn off the unit before connecting the AV cable.
2.
Use the AV cable to connect a device as shown in the image below.
3. After connecting, press the
indicator will light up GREEN
4. Press the
device will show on the projector screen.
5. Press the
button to turn off the unit power.
button to turn on the projector and the power
/SOURCE button to go to the AV mode and the video of AV
button to turn off the unit power.
15