Lenco LPJ-900WH Manual Del Usuario página 8

Remove & Close The Lens Cover
Remove the lens cover before using Close the lens cover after use.
Placing Your Projector
Your projector can be installed in four different configurations (see picture below):
Table mounting front:
Select this location with the projector is placed
in front of the screen. This is the most common
way to position the projector for quick setup
and portability.
FRONT TABLE
Ceiling mounting front:
Select this location when the projector is
mounted upside down at the ceiling in front of
the screen.
NOTE: A projector mount is required to mount
FRONT CEILING
the projector on the ceiling.
Table mounting rear:
Select this location if you want to place the
projector at the rear of the screen.
NOTE: That a special rear projection screen is
required.
REAR TABLE
Ceiling mounting rear:
Select this location when the projector is
mounted upside down at the ceiling at the rear
of the screen.
NOTE: That a projector mount and a rear
projection screen is required to mount the
REAR CEILING
projector on the ceiling.
7