Daikin BAEF125AWB Manual De Instalación página 21

Pleated filter replacement time setting
• This setting must correspond with the air contamination in the room. It determines the interval at which
the notification to replace the filter is displayed on the user interface. When using a wireless user interface,
you must also set the address (see the installation manual of the user interface).
(The SECOND CODE No. is set to "01" by factory default.)
Set after explaining the details of the settings to the customer and obtaining their consent.
Operating time until notification
Air
contamination
Pleated filter replacement time
Light
Heavy
Filter sign enabled
Filter sign disabled *
* Set "Filter sign disabled" when replacing notification is unnecessary, such as when performing periodic
maintenance.
The pleated filter can be used up to 12 months (2,500 hours). The pleated filter lifetime may vary depending
on the room conditions. In rooms with lot of pollutants (smoke, pets, high traffic areas...) pleated filter may
require more frequent changes.
The pleated filter CANNOT be renewed by washing.
English
01_EN_3P701968-3.indd 20 01_EN_3P701968-3.indd 20
Approx. 2,500 hours
Approx. 1,250 hours
Mode No. FIRST
(Refer to Note.) CODE No.
10(20) 0
10(20) 3
SECOND
CODE No.
01
02
01
02
20
12/05/2023 15:12:34 12/05/2023 15:12:34