RIDGID SeeSnake NANO reel Manual Del Operador página 13

Connecting to the CSx Via
The CSx Via Wi-Fi inspection device can
be connected to the NANOreel through the
slip-ring cavity. Remove the slip-ring assem-
bly from the NANOreel and install the CSx
Via into the slip-ring cavity.
For more instructions on installing the CSx
Via, refer to the operator's manual.
Retrieving the Camera
Pull the push cable back out of the pipe with
slow, steady force and feed small lengths
back into the drum. Wipe the push cable
with a paper towel or rag as you retrieve it.
Do not exert excessive
NOTICE
force or pull at sharp an-
gles.
lengths or forcing the
push cable may cause it
to loop, kink, or break.
Pipe Guides
Pipe guides center the camera in the pipe,
improve picture quality, and help keep the
lens clear. Use pipe guides when possible
to reduce wear and tear on the camera sys-
tem.
Feeding longer
Removing the Slip Ring
Assembly
1. Disconnect the system cable from the
reporting monitor and remove the mon-
itor from the docking system.
2. Unwrap the system cable from the
cable wraps.
3. Pop the frame cable anchor off the
frame and unhook the system cable
from the frame hook.
4. Turn the slip-ring dial counter-clock-
wise to the unlocked position .
5. Pull straight out.
Do not touch the contact
NOTICE
pins inside the slip-ring
dial. Stressing the con-
tact pins can cause them
to break.
NANOreel – English – 13