Publicidad
Idiomas disponibles
Idiomas disponibles
Using Guide Tubes
Use guide tubes, such as PVC or flexible
tubing, to avoid marring or scratching
porcelain surfaces.
Use PVC pipe and conduit to form a guide
tube with a curved access tube at the
bottom to guide the push cable past the
porcelain without damage.
Use ribbed flexible conduit to fashion a
flexible guide tube similar to the PVC guide
tube.
14 – English – NANOreel
Maintenance and
Support
Cleaning
Clean the micro CA-350 or monitor in
accordance with its operator's manual.
Before cleaning the NANOreel, remove the
micro CA-350 from the display cradle. Do
not allow the micro CA-350 or monitor to get
wet during cleaning.
Clean your system with rags and a soft
nylon brush. If desired, a mild detergent or
disinfectant can be used. Do not use sol-
vents or high pressure water to clean any
part of the system.
Maintaining Components
Camera Head
Scratches on the camera have a minimal ef-
fect on its performance. Do not use scraping
tools or sand the camera to remove scratch-
es.
Push Cable
Run a rag over the push cable and visually
inspect it for cuts and abrasions while push-
ing it back into the drum. Replace or repair
the push cable if the outer jacket is cut or
abraded.
Storage
The NANOreel must be stored in a dry, se-
cure area between -20°C and 70°C [-4°F
and 158°F]. Store your equipment in a
locked area out of the reach of children and
people unfamiliar with its purpose.
Support
For support and additional information
about using your system, visit support.
seesnake.com/nanoreel.
Publicidad
