Publicidad
Idiomas disponibles
Idiomas disponibles
REPAIR
PROBLEM
The mower does not start
The mower cuts off the
grass unevenly
The mower does not cut the
grass correctly
The mower is difficult to
grow
The mower is excessively
noisy and vibrates
03/04/2023
POSSIBLE CAUSE
The plug is not connected
The interputor is defective
Pacifier that blocks the blade
The catch is not well engaged
The lawn is too high or unequal
The cutting height is not defined
correctly
Wet gas residues stuck under the
mower
The tank is badly engaged, and
drags in the back
The grass is too high, or the cut-
ting height is too low
Fibers or an external element
makes it difficult to rotate the
wheels
The engine axis is twisted
The blade is unbalanced
SOLUTION
Connect the socket
Replace the switch
Disconnect the power supply, check
the blade rotation and clean
Check the connections between the
socket and the mower
Check the mowing area
Return the cutting height, check that
the axes are at the same level
Clean your mower and wait for your
dry lawn
Put the tank properly
Return the cutting height
Check that each wheel turns freely
and disgust the elements that can
hinder
Stop the engine and inspect the
damage
Start/sharpen the blade before
leaving, if the vibration persists,
replace the blade
EN
45
Publicidad
