Voltr LMJ1300WAC Manual De Instrucciones página 46

EN
TECHNICAL CHARACTERISTICS
Number of vacuum rotations of the engine
Engine
Protection class II
Protection index
Weight
Cutting width
Recovery tray
Cutting height adjustment
Sector voltage 230-240V ~/50Hz
NOISE AND VIBRATIONS
Noise and vibration values are given according to the EN 60335 standard
Acoustic pressure level LPA
Uncertainty K
Level of acoustic intensity measured LWA
Level of acoustic intensity guaranteed LWA
Uncertainty k wa
Vibratory emission value Ah
The actual level of vibrational emissions may differ from the value indicated in this manual
To exactly estimate the load by vibrations for a certain working time, it is also necessary to take
into account the time of stopping or empty walking of the device.
This can cause a significant reduction in the load volume by vibrations over the total working
To prevent blood circulation disorders from the hands caused by vibrations, it is necessary to
As a measure to reduce vibrations, we can cite the wearing of gloves when using the tool and
46
WARNING :
according to the type and mode of use.
hours.
ATTENTION !
take breaks in work.
Try to reduce vibrations as much as possible.
the limitation of working time.
3450Tr/min
Brush engine
II
IPX4
6.65 kg
320 mm
25 L
25 to 65 mm (3 levels)
230-240V~/50Hz
80.1 dB (A)
3 dB (A)
92.2 dB (A)
96 dB (A)
1,5 m/s2
3.24m/s2
03/04/2023