Publicidad
Idiomas disponibles
Idiomas disponibles
3.3.c - Humidifier key (A3)
Press the key (A3) to increase/decrease the percentage of desired humidity; on the display, the set value flashes
on the display (L1) three times before returning to display alternatively the ambient temperature and the percentage
of detected humidity.
The settable value is included between 40% and 80% (with 5% steps).
When the detected humidity is lower than the set value, the appliance starts to dispense mist.
When the detected humidity is higher than the set value, the appliance stops dispensing mist.
3.3.d - Plasma key (A4)
Press the key (A4) to activate the function; the corresponding LED (L3) switches on.
This function generates ions which neutralize the positive and negative charges in the air, disassembling the pol-
lutants and making them harmless, reducing the bacteria and removing fume, dust and smell.
Press the key (A4) a second time to deactivate the function.
3.3.e - Mist key (A5)
Press the key (A5) to activate the warm mist dispensing function; the corresponding LED v(L4) lights up red.
Press the key (A5) a second time to deactivate the function.
3.3.e.1 - Temperature unit of measurement setting
Keep the key (A5) pressed for 5 seconds to change the unit of measurement of temperature from °C (Celsius) to
F (Fahrenheit).
3.3.f - Mist emission key (A6)
Press the key (A6) to select the emission level of mist according to this sequence:
The LED (L5) corresponding to the desired level of emission lights up on the display.
3.3.g - Mode key (A7)
Press the key (A7) several times to select the desired mode.
3.3.g.1 - Automatic mode
In this mode, the appliance automatically keeps humidity constant at 55% and the mist emission level is adjusted
based on the detected humidity; the corresponding LED (L7) lights up. The plasma function signalled by the re-
spective LED (L3) is active.
When the detected humidity is lower than 45%, the mist emission level is adjusted to "High (III)".
When the detected humidity is higher than 55%, the appliance stops supplying mist.
When the detected humidity is lower than 10° C, the appliance starts to supply warm mist, LED (L4) red.
3.3.g.2 - Children mode
In this mode, the appliance automatically keeps humidity constant at 55% and the mist emission level is adjusted
based on the detected humidity; the corresponding LED (L6) lights up.
When the detected humidity is lower than 45%, the mist emission level is adjusted to "High (III)".
When the detected humidity is higher than 55%, the appliance stops supplying mist.
In this mode, the plasma function and the warm mist dispensing function are deactivated.
3.3.g.3 - Sleep mode
In this mode, the appliance automatically keeps the mist emission level set to "Low (I)" and all the lights remain
off; the respective LED (L8) lights up.
3.3.g.4 - Manual mode
In this mode, the mist emission level, the dispensing of mist or warm mist and the activation/deactivation of the
lights are set manually.
3.3.h - Control lock (A8)
Press the key (A8) for a few seconds to activate the control lock function; the respective LED (L10) lights up; when
the function is activate, all the other keys are disabled.
Press the key (A8) for a few seconds to deactivate the function.
EN - 6
Medium (
) --> Low (
) --> High (
) --> Medium (
) --> ...
Publicidad
