Launch Amplifi er Avant3
How to use the programmer
MAIN MENU
INPUTS
U1 | U2
[2] |[3]
*
FILT VHF
_ _
(short press)
05 __
FILTER 5
__
* The functions relating to programming the
VHF fi lter, as well as for powering preamps
through this input, do not apply to this
product
After connecting the programmer to the Avant3, it
sends the parameters with which it is confi gured
(input confi guration, fi lter settings, ...). During this
process, the programmer displays its version of SW
for a while. The screen appears as follows:
PCT firmware
version
------------
V:x.xx
|
FILTER 1
__
Only from
"Inputs" menu
(long press)
From any menu
(long press)
Saving
config...
It then displays the SW version of the Avant3, also
briefl y:
Unit
firmware
version:
V:x.xx
Next, it will be displayed the main menu fi rst
option.
EXTENDED MENU
LANGUAGE
English
22