Publicidad
Camera pairing with TX-128
Do not enter a MicroSD card into the camera when you bind the device
with a TX-128! It causes problems.
After connecting the camera with the NVR you are not able to set any of
the options your are able to use in standalone mode!
Note:
(1) Place the camera and the wireless TX-128 monitor within 30-100 cm
distance.
(2) Press and hold the RESET button for at least 5 seconds.
(3) When the indicator light of camera become to red light and fast flashing,
that means enter the code matching mode.
(4) Connect to Wireless NVR
→ Click the screen, click the "home" icon, and click the [Match Code]
module.
→ Click the "Match Code" button. After the adding is successful, click the
"Stop" button. Otherwise, repeat steps 2 and 3.
29
Model: TX-192 Article No. 4991, 07/2022
Publicidad
