Choosing Cameras For Recording (Program Recording) - Sony HSR-X216 Manual De Instrucciones

Choosing Cameras for
Recording (Program Recording)
You can choose particular cameras to be used for
recording from among the cameras connected to this
unit. Up to 4 patterns (P-1 to P-4) can be set.
Recording rates can also be specified for each camera.
Note
HSR-X216: The highest recording rate for program
recording is 30 FPS. This recording rate is divided
among the cameras that are set to ON. For
example, if 5 cameras are set to ON, the largest
recording rate per camera is 6 FPS.
Refer to the tables on page 30(GB).
HSR-X209P/X216P: The highest recording rate for
program recording is 25 FPS. This recording rate
is divided among the cameras that are set to ON.
For example, if 5 cameras are set to ON, the largest
recording rate per camera is 5 FPS.
Refer to the tables on page 31(GB).
Perform the setting with the submenu 4. PROGRAM
REC SET of the main menu 2. RECORD SET.
Setting procedure
1
Display the main menu, then select 2. RECORD
SET.
2
Select 4. PROGRAM REC SET.
The PROGRAM REC SET menu appears.
<PROGRAM REC SET>
P-1
SELECT INDIVIDUAL CAMERA RATE (FPS)
01:0.26 02:0.26 03:0.26
05:0.26 06:0.26 07:0.26
09:0.26 10:0.26 11:0.26
13:0.26 14:0.26 15:0.26
NORMAL REC :
ALARM REC : 02880
(You can set only 01 to 09 with the HSR-X209P.)
3
Select a program number (P-1 to P-4) with the Jog
dial, then turn the Shuttle dial clockwise.
The cursor moves to the rate (FPS) setting area.
04:0.26
08:0.26
12:0.26
16:0.26
510H
4
Specify the recording rate value for the camera
input to be used for recording with the Jog dial,
then turn the Shuttle dial clockwise.
Set to OFF for a camera input which is not to be
used for recording with the Jog dial, then turn the
Shuttle dial clockwise.
The cursor moves to the next camera input.
5
Repeat step 4 for each camera input.
The available total recording time and the number
of alarm recordings are displayed in the lower part
of the screen according to the number of cameras
you chose and the specified recording rate.
Perform settings for other program numbers in the
same manner as in steps 3 to 5.
When the settings are completed
Press the EXIT/OSD button to exit the menu.
Setting of the program recording is also possible for
pre-alarm recording and timer recording.
Audio recording during program
recording
Audio recording can be activated when the smallest
recording rate set for a camera is 1 FPS or more (HSR-
X216) or 0.96 FPS or more (HSR-X209P/X216P).
29
(GB)