Web Operations; Accessing The Recorder - Sony HSR-X216 Manual De Instrucciones

Web Operations

The HSR-X216/X209P/X216P can be connected to a
network via an optional network card and operated
through the network.
Operational conditions
To operate the HSR-X216/X209P/X216P via a
network, use under the following conditions.
PC: Pentium III 400 MHz, 64 MB or more
OS: Windows 95/Windows 98/Windows Me/
Windows NT 4.0 ServicePack 5 or higher/
Windows 2000/Windows XP
Web browser: Internet Explorer 5.0 or higher
For the connections and the preparatory settings on the
HSR-X216/X209P/X216P, see "Network Connections and
Associated Settings" on page 54(GB).
Note
If the Proxy ON setting has been selected with the
browser software on the PC for control via the
network, entire or partial loss of a downloaded picture
may occur. In addition, the proxy server model setting
may cause various unexpected phenomena. To
eliminate such problems, it is strongly recommended
to use the Proxy OFF setting.

Accessing the Recorder

1
Start Internet Explorer.
2
Type the following in the Address box and press
the Enter key.
http://< IP address for the HSR-X216/X209P/X216P >/
The IP address for the HSR-X216/X209P/X216P is
the one that has been set with the submenu 6.
NETWORK SET of the main menu 3. GENERAL
SET.
The Network Password input window opens.
68
(GB)
Notes
• If you try to access an HSR-X216/X209P/X216P
on which anther PC has logged, the message
"THE UNIT IS BUSY!" will be displayed.
• If you try to access an HSR-X216/X209P/X216P
which does not permit connection, the message "
THE UNIT IS NOT READY!" will be displayed.
3
Type ID1, ID2, or ID3 in the ID box and the
corresponding password set with NETWORK SET
in the Password box.
Notes
The operations via the network are limited
depending on the password you entered.
If you accessed with the password for ID1: You
are enabled only to view the current camera
input.
If you accessed with the password for ID2: You
are enabled to view the current camera input or
playback picture and perform operations related
to playback and data storage. Recording and
menu operations are not allowed.
If you accessed with the password for ID3: You
are enabled to perform operations using all the
browser buttons.
If you accessed with ID1 or ID2 and try to perform
an operation not allowed, a warning message will
be displayed.
4
Click on OK.
When the password is verified, the SELECT
LANGUAGE display for the HSR-X216/X209P/
X216P is displayed.