Timer Recording; Setting Procedure; Settings For Timer Recording - Sony HSR-X216 Manual De Instrucciones

Timer Recording

You can set the HSR-X216/X209P/X216P to perform
recording during a specified time every day or on a
specified day of the week.
Up to eight sets of timer recording can be specified
On the days specified as holidays with HOLIDAY
SET, timer recording will be made with the same
conditions as those set for Sunday.
In timer recording, data will be recorded in the normal
recording area with the same picture quality as selected
for normal recording.
Before you activate timer recording
Be sure that the built-in clock has been correctly set.
Clock setting can be achieved with 1. LANGUAGE/
CLOCK SET
(page 61(GB))
1. INITIAL SET.

Settings for Timer Recording

The day of the week and starting/ending times are to
be specified to activate timer recording. Use
5. TIMER SET of the main menu 2. RECORD SET.
<TIMER SET>
WEEK START STOP PROGRAM
SUN --:-- --:-- 0FF
MON --:-- --:-- 0FF
THE --:-- --:-- 0FF
WED --:-- --:-- 0FF
THU --:-- --:-- 0FF
FRI --:-- --:-- 0FF
SAT --:-- --:-- 0FF
DLY --:-- --:-- 0FF
START: Set the time to start recording (hours and
minutes in sequence).
STOP: Set the time to stop recording (hours and
minutes in sequence).
PROGRAM: To use the program recording function,
select a program among P-1 to P-4. If you do not
need this function, select OFF.
..........................................................................................................................................................................................................
1) If the specified time for recording overlaps with those on
other lines, recording will be made with the following
priority for the overlapped parts:
1. Recording set for SUN
2. Recording over midnight
3. Recording set for a certain day of the week (MON to
SAT)
40
(GB)
1)
.
of the main menu
FPS SET
25FPS OFF
25FPS OFF
25FPS OFF
25FPS OFF
25FPS OFF
25FPS OFF
25FPS OFF
25FPS OFF
For details on the program recording, see "Choosing
Cameras for Recording" on page 29(GB).
FPS: Select the recording rate.
SET: To activate timer recording specified on this
line, set to ON.
The same picture quality selected for normal recording
is used for timer recording.
When audio recording is valid, "A" appears before the
FPS value.

Setting procedure

1
Display he main menu, then select 2. RECORD
SET.
2
Select 5. TIMER SET from the submenu.
The TIMER SET display appears.
3
Turn the Jog dial to highlight the line to be set and
turn the Shuttle dial clockwise to finalize your
selection.
The WEEK column of the selected line flashes.
4
Turn the Jog dial to set the day of the week and
turn the Shuttle dial clockwise to register the
setting.
To record with the same condition every day, set to
2)
DLY .
The left field of the START column flashes.
5
Set the remaining items on the line using the Jog
and Shuttle dials.
You can set the time and FPS values by directly
entering the numbers with the INPUT SELECTOR
buttons 1 to 9 and the MULTI, QUAD, OPTION
or MONITOR 2 button.
4. Recording set on the lowest two lines of the display
5. Recording set for DLY
2) DLY includes all the days of a week (MON to SUN).