Grundfos AMD.05-08 Instrucciones De Montaje página 6

3.2 Nameplate
You can identify the mixer by means of the
nameplate on the mounting clamp. Use the details
on the nameplate for ordering of spare parts.
1
Type: AMD.07.18.1430.T.5.0B.A
2
Prod. No: 99018155
3
U: 3x400V~50Hz
I : 1.62A n: 1430min
MAX
4
P1/P2: 0.76 / 0.59 kW
5
Vers: 1 : P 3
6
0197
MADE IN HUNGARY
P.c: 0000
14 15
Fig. 2 Nameplate
Pos. Description
1 Type designation
2 Product number
3 Supply voltage and frequency
4 Maximum current
5 Motor power input and output
6 Version number
7 Rated speed
8 Maximum liquid temperature
9 Maximum installation depth
10 Power factor
11 Net weight
12 Insulation class
13 Enclosure class
14 Production code
15 Place of production
Fix the additional nameplate supplied with the mixer
in a visible position at the installation site.
6
7 9
8
°
T : 40 C
MAX
11
: 10m W: 10.8kg
-1
10
Class: F
12
IP 68
13
4. General safety instructions
Follow these safety instructions as well as the
instructions in each individual section when
transporting, storing, handling and operating the
mixer.
Warning
The mixer must be installed, connected,
started up and serviced by qualified
persons.
Warning
Beware of rotating parts.
Warning
Make sure that persons cannot
accidentally fall into the pit or tank, for
instance by installing a cover or railing.
Maintenance, service and repairs
The mixer must only be dismantled by Grundfos or
an authorised service workshop. This also applies to
the cable entry.
Use only components produced by Grundfos for
repair purposes.
5. Storage
Store the mixer in a dry location in which the
temperature is not subject to major fluctuations.