Publicidad
Idiomas disponibles
Idiomas disponibles
• Do not use the charger after it has been hit,
dropped or otherwise damaged. Entrust the
testing and potential repair to authorized service
workshop.
• Do not try to dismantle the charger. All repairs
should be made by an authorized service
workshop. Improper charger assembly may cause
electric shock or fire.
• Disconnect the charger from power supply before
starting any maintenance or cleaning.
• In case of battery damage or improper use it may
produce gas. Ventilate room and seek medical
attention in case of medical symptoms.
• Keep the charger clean. Dirt can be the cause of
electric shock.
• Do not use charger when placed on flammable
surface (e.g. paper, textiles) or in proximity
of flammable substance. Greater charger
temperature when charging increases risk of fire.
When the charger is not in use, it should be
disconnected from mains network.
CAUTION! This device is designed to operate
indoors.
The design is assumed to be safe, protection
measures and additional safety systems are used,
nevertheless there is always a small risk of injuries
at work.
Li-Ion batteries may leak, set on fire or explode
when heated to high temperature or short-
circuited. Do not store the batteries in a car in hot
and sunny days. Do not open the battery. Li-Ion
batteries contain electronic protection devices
that, if damaged, may cause fire or explosion of
the battery.
Explanation of used symbols
1
4
7
Max.
50°C
10
Read the instruction manual, observe
1,2.
warnings and safety conditions therein.
Use
protective
3.
protectors.
Keep the tool away from children.
4.
Protect against rain.
5.
Device with class II insulation.
6.
Disconnect the power cord before starting
7.
maintenance or operation.
Use indoors, protect from water and moisture.
8.
Do not throw into fire.
9.
Maximum permissible cell temperature.
10.
Recycling
11.
DESIGN AND INTENDED USE
The drill/driver is a cordless power tool. Its drive is
a commutator DC motor with fixed magnets and
a planetary gearbox. The drill/driver is intended for
driving in and out screws and bolts in wood, metal,
plastic, and ceramics, and for drilling holes in those
materials. Battery-powered, cordless power tools
15
2
3
5
6
9
8
11
goggles
and
hearing
Publicidad
