Yamaha ATS-1080 Manual De Instrucciones página 8

NOTICE AND INFORMATION
Notice
Indicates points that you must observe in order to prevent product
failure, damage or malfunction and data loss.
Power supply
• If not using the unit for a long period of time, be sure to pull the
power plug from the outlet. Even if this unit is turned off by [z]
(Standby/On), a minute current is still flowing.
Installation
• Do not use this unit in the vicinity of other electronic equipment,
such as a TV, radio, or mobile phone. Failure to observe this may
cause this unit or the TV or radio to produce noise.
• Do not use this unit in a location that is exposed to direct sunlight
that becomes extremely hot, such as near a heater, or extremely
cold, or that is subject to excessive dust or vibration. Failure to
observe this may cause the unit's panel to become deformed, the
internal components to malfunction, or for operation to become
unstable.
• If using a wireless function, avoid installing this unit near metal
walls or desks, microwave ovens, or other wireless network
devices.
Obstructions could shorten the transmission distance.
Connections
• If connecting external units, be sure to thoroughly read the
manual for each unit and connect them in accordance with the
instructions.
Failure to properly handle a unit in accordance with the
instructions could cause malfunctions.
• Do not connect this unit to industrial units.
Digital audio interface standards for consumer use and industrial
use are different. This unit has been designed to connect to a
consumer-use digital audio interface. Connections to an
industrial-use digital audio interface could not only cause this unit
to malfunction, but could also damage the speakers.
Handling
• Do not place vinyl, plastic, or rubber products on this unit. Failure
to observe this may cause discoloration or deformation in the
panel of this unit.
• If the ambient temperature changes drastically (such as during
unit transportation or under rapid heating or cooling) and there is
a chance condensation may have formed in the unit, leave the
unit for several hours without turning on the power until it is
completely dry before use. Using the unit while there is
condensation can cause malfunctions.
8
En