Black and Decker BESTE625-QS Guía Rápida página 7

The declared vibration emission value
may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used.
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should
consider, the actual conditions of use and
the way the tool is used, including taking
account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time.
After use
When not in use, the machine should

be stored in a dry, well ventilated place
out of reach of children.
Children should not have access to

stored machines.
When the machine is stored or

transported in a vehicle it should be
placed in the boot or restrained to
prevent movement following sudden
changes in speed or direction.
Inspection and repairs
Before use, check the machine for

damaged or defective parts.
(Original instructions)
Check for breakage of parts and any
other conditions that may affect its
operation.
Do not use the machine if any part is

damaged or defective.
Have any damaged or defective parts

repaired or replaced by an authorised
repair agent.
Never attempt to remove or replace

any parts other than those specified in
this manual.
Additional safety instructions for
grass trimmers
Warning! Cutting elements continue to
rotate after the motor is switched off
Be familiar with the controls and the

proper use of the machine.
Before use, check the power supply

cord and extension cord for signs of
damage, ageing and wear.
If a cord becomes damaged during
use, disconnect the cord from the
mains supply immediately. DO
NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
Do not use the machine if the cords

are damaged or worn.
Before using the machine and after

any impact, check for signs of wear or
damage and repair as necessary.
Always ensure that the ventilation slots

are kept clear of debris.
Wear stout shoes or boots to protect

your feet.
Wear long trousers to protect your

legs.
ENGLISH
.
7