Bosch MRF23EVS Instrucciones De Funcionamiento Y Seguridad página 27

BM 2610033452 02-14_MR23EVS 3/3/14 9:50 AM Page 27
If an extension cord is
W RNING
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
1/4" Collet Chuck *
1/2" Collet Chuck *
16 mm Shaft Wrench *
24 mm Collet Nut Wrench *
3/8" Collet Chuck **
8 mm Collet Chuck **
Deluxe Router Guide **
Centering Device **
Carry Case**
Dust Extraction Hoods **
Edge-Forming Dust Extraction Hood **
Accessories
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Rating
25
3-6 18
6-8 18
8-10 18
10-12 16
12-16 14
Router Tables **
Router Bits **
Quick-Release Templet Guides **
Adapter for Threaded Templet Guides **
Adjustable Depth Stop Turret *
Templet Guide Adapter **
(*= standard equipment)
(**= optional accessories)
-27-
Wire Sizes in mm
Cord Length in Feet Cord Length in Meters
50 100 150 15 30
16 16 14 0.75 0.75 1.5
16 14 12 0.75 1.0 2.5
16 14 12 0.75 1.0 2.5
16 14 12 1.0 2.5 4.0
12 — — — —
2
60 120
2.5
4.0
4.0
—
— —