Klauke MAP 1 Manual De Instrucciones página 31

Instruction Manual MAP 1
_______________________________________________________________________________________________________________________
We would like to draw your attention to the following points:
1. The electric-hydraulic pressing unit have to be cleaned and dried after each use before being
put into the transportation case.
2. In order to guaranty a proper function of the machine the pressing tool should be returned to
the manufacturer or one of our Authorized Service Centers (ASC's) after the light diode
display (Pos.-#. 9) indicates Service.
3. The battery as well as the charging unit must be protected against humidity and foreign
objects.
4. The bolt joins, the drive rolls and their guides must be oiled regularly in small amounts.
5. Check through test crimps or have the tool manufacturer check the tool and pressing jaws
regularly for proper function.
6. Keep pressing jaws clean. Remove dirt with a brush.
In order to avoid possible malfunctions we offer you a manufacturer service consisting of
disassembly, cleaning, exchange of possibly worn out parts assembly and final control. Only a
clean and properly functioning press system can over the time safeguard a leaking free
connection.
Within the determined use of the tool only the pressing jaws (Pos.-#. 7) are permitted to be
changed by the customers.
Attention
Do not damage the seals of the tool.
If the seals are damaged the warranty is invalidated.
page 31